LatestLibChar runs 100x faster in the cloud with IC Manage Holodeck (408) 647-6025sales@libtech.com
Library Technologies, Inc.IC Timing, Power, Yield and Reliability

News

What Is New?

IC Manage Partners with Library Technologies to Accelerate Library Characterization by 100x in the Cloud

IC Manage, Inc. and Library Technologies completed validation testing of IC Manage Holodeck and the Library Technologies LibChar application to enable horizontal CPU scaling in the cloud, improving throughput by 100x compared to a single server run. Library characterization runtimes were reduced from nearly 3 weeks to less than 4 hours, without code or flow changes.

Read the press release (PDF, icmanage.com)

SolutionWare 1.141w

Characterizes and generates CCS-Power models.

SolutionWare 1.140n

CCS characterization and modeling for liberty.

Positional Sizing: A Recipe for High Speed and Low Power Cell Libraries

Positional sizing of parallel and series transistors has a big impact on cell delay, area and on switching energy. For the same effective delay of a uniformly sized cell, a positionally sized cell can be implemented in 30-50% smaller active area and dissipates 20-50% less energy.

For more information go to our Publications Department.

Wire Load Independent Logic Synthesis and Timing Closure

Please see the paper “Wire Load Independent Logic Synthesis and Timing Closure with Constant Replacement Delay Cell Libraries” for a short description of our Patent Pending Technology.

LTI Introduces CellOpt

Designers have, for the first time, the ability to optimize for power and speed under dynamic conditions using a spice level simulator. CellOpt automatically finds the best device sizes to meet the speed constraints while at the same time minimizing power usage, and preserving the functionality of the cell.

CellOpt can handle any cell which can be described using our ACDL format, except memory cells. It has been shown to reduce power usage by as much as 50%, without affecting the critical path through the cell, or reduce the maximum delay by 50% with small change in energy use, depending on how bad the initial design was.

CellOpt works with standard circuit simulators. It uses numeric optimization algorithms, not heuristics as is commonly used. It is dynamic rather than static, and optimizes the circuit over a range of input states automatically determined by the tool.