LatestLibChar runs 100x faster in the cloud with IC Manage Holodeck (408) 647-6025sales@libtech.com
Library Technologies, Inc.IC Timing, Power, Yield and Reliability

Learn

Library characterization glossary

Short definitions of the terms used across characterization, library verification and cell optimization.

ACDL
ASIC Cell Description Language, developed by Library Technologies to capture the behavior of library cells concisely: one line describes a flip-flop with reset. More
Characterization
Measuring the timing, power and input loads of a cell with circuit simulation (SPICE) and writing the results as library models. More
CCS
Composite Current Source: a current source based delay model in Liberty libraries, used for accurate delay calculation with RC interconnect loads. More
CCS-Power
Supply currents reported for each input switching, in CCS format, including information for multiple-supply designs. More
DSPF
Detailed Standard Parasitic Format: a netlist of extracted resistances and capacitances, used to load a cell with a distributed RC network in test benches. More
ECSM
Effective Current Source Model: a current source based delay model. CCS and ECSM can co-exist in the same Liberty library. More
Liberty (.lib)
The library format read by synthesis and static timing analysis tools, describing the function, timing and power of each cell. More
MakeLib
The LTI flow manager: one command such as makelib libertylibrary sequences verification, characterization, modeling and model tests. More
Monte-Carlo analysis
Repeated SPICE simulation with randomly varied process parameters to estimate timing variation. Becomes impractical beyond a few random variables. More
NLDM
Non-Linear Delay Model: table lookup timing and power indexed by input slope and output load. The default for Liberty libraries. More
OCV
On-chip variation: random variation between devices on the same die, increasingly significant at new process nodes. More
SSTA
Statistical static timing analysis: timing analysis that carries statistical variation to the design level. More
Standard cell
A pre-designed logic gate or flip-flop with a fixed layout, used as a building block by synthesis tools to implement digital designs. More
State dependency
Delay, power, input capacitance or setup/hold values that depend on the state of other inputs. Identified in SolutionWare by StateGen. More
Temperature inversion
Process conditions that are fast at high temperatures but slower at lower temperatures. Especially serious for low voltage designs. More